November 01, 2024, 04:21:56 PM

News:

Be sure to checkout our Vixen interfaces in the Library forum -- if you want PC automation at near zero cost, EFX-TEK and Vixen is a great combination of tools.


AP-16 no status led

Started by gadget-evilusions, September 29, 2010, 09:37:22 PM

Previous topic - Next topic

gadget-evilusions

Hi,

I delivered an animatronic last week. It uses a prop-1 controlling an AP-16 serially. It worked perfect before I drove it to it's new home. Now my customer is telling me that the prop still operates but there is no status light on the AP-16 and that no sound is coming out. The SD card still has the files on it. Manually triggering the sounds does not work as well. I can't find anything in the documentation that would explain no Status led. Any ideas?
Brian
Evilusions LLC
www.evilusions.com for all your pneumatic components

BigRez

You didn't mention it Brian and perhaps you've already checked, but is the power source good?  Could the movement have loosened a connection?

JonnyMac

There are LEDs near the regulators -- do those light?
Jon McPhalen
EFX-TEK Hollywood Office

gadget-evilusions

The AP-16 power supply is plugged in properly, and the power indication led is lite.
Brian
Evilusions LLC
www.evilusions.com for all your pneumatic components