AP16+ Sending left channel to speaker and right to Servo board

[leving]

I have created a Stereo wav file that has a control signal on the right channel and a voice speaking on the left.  I plan on connecting the right channel from the AP16+ to a Cowalacious servo board and the Left channel to speakers.  The reason for doing this is to have a more percise trigger for a talking head to properly mimic what is spoken out the speakers.  Do you forsee any issues with doing this.  Yes, I will be using an 8 ohm speaker.

[JonnyMac]

You shouldn't have any problems, just use the RCA jack from the control channel into Carl's board (the speaker output is too hot).  Also, a 4-ohm speaker will work best with the amp, but 8 is okay.

[JackMan]

This setup works great. I've posted on this very subject several times, the line level outputs from the AP-16+ are perfect for this because the servo driver input is unaffected when the volume of the AP-16+ is changed.

[leving]

I have been very happy with the AP16+.  It started in a MIB and now will be better put to use standing out front mumbling to itself and then firing off a random rant when triggered by a PIR directly connected.