In way over my head!

[NightmareFactory]

Bought the folowing and have no clue what to do next...

Help! ::)

Prop-1 starter kit, Wickled, Lamp fader, Prop-1 controller.

My intention is to use them for our haunted house, but I'd like to get cracking and learn how to use this gear.

Any help would be, well... helpful!

Ed Roberts
The Nightmare Factory
http://www.nightmarefactorysalem.com

[JonnyMac]

Step 1: Relax -- we're here to help
Step 2: Define what you want to do (specifics count)
Step 3: Bask in the awe bestowed on you by friends with your cool new props/effects

Have a look at this document: http://www.efx-tek.com/downloads/prop-1_prog_basics-handout.pdf -- this will familiarize you with programming the Prop-1.  Again, relax, we will show you how to convert your prop desires into real, working programs.

[NightmareFactory]

Where do I find the program to run my equipment?

[livinlowe]

Well, what do you want to do? I take it that you have two prop-1's? So you can use the first one for electronic candles and the second to control the FC-4. But, what do you want to do?

[JonnyMac]

If you go to the Prop-1 page on our web site you'll find a link to Parallax for the BASIC Stamp IDE; you'll need that to program the Prop-1 and Prop-2.

[livinlowe]

Ohhhh, Haha! Sorry! I totally mistook your question!  :D


edit: Here is the link:

http://www.parallax.com/tabid/441/Default.aspx

Hope that helps