Strange Prop2 behaviour

[steveo]

Jon,
I'm hoping you can give me some insight into a oddball issue I just had. My talking skele, which was been rock solid over hundreds of cycles did something a little odd. I turned on the Prop2, all was well, then it started triggering over and over again even with the trigger removed from the input pin. I re-flashed the code, and all was well again.

Any clues?

[JonnyMac]

I would suspect a power lag may have caused a problem in the EEPROM.  If you're running a bunch of servos you'll want to make sure that you have plenty of power for them.