Simple question

[davisgraveyard]

Is it possible to remove the pins out of one of your connector cables?  I need to make the custom cable described in the uMP3 article under Audio.  I need to remove the cables from the 3 pin connector and put the red/black into a 2 pin connector and the white into another 2 pin connector.   THought it would be easier to just modify some exisiting jumper cables.   If the pins can be removed?

Jeff

[JonnyMac]

Yep.  If you look closely at the black plastic shells you'll see little windows that expose the locking table of the metal socket.  Use a pointed object to press this tab while pulling lightly on the wire; it will slip out easily.  Once you have them out, protect the sockets from possible shorts by covering them with heat shrink tubing.