Cowlacious ST300 Board + AP16

[MFT]

Great suggestion JonnyMac, but I'm having trouble! How do I connect the AP16 to the ST300 (Audio Servo Board)?

[bsnut]

That's easy to do, but you are having some problems with Jon suggestion ;D.

You can hook it up this way. Take a cable with RCA male(for the AP16+) on one end and other end needs to be a 3.5mm(for the ST300) stereo male, so you can plug it in to the ST300. You should be able to find a "Y" cable at a Radio Shack, were the 2 RCA male ends(one for left and one for right) are on the "Y" end of the cable and the 3.5mm male stereo plug on the other end. I will attached the ST300 manuals for you, which should help you.

[JonnyMac]

You'll need a cable like this one:
-- http://www.nextag.com/Steren-Stereo-Audio-Y-55447064/prices-html

[MFT]

I've got the sound OK. Now, I'm having problems with the servo motion. I've tried adjusting the Servo Adj. but I'm still not getting enough movement. WhY?

[JonnyMac]

Please contact Carl about actually using his products; the extent of our assistance here can only be to get you connected.