November 24, 2024, 04:20:16 AM

News:

Got VSA?  Want to use your Prop-SX?  Now you can!  See the VSA section of the Library forum for Prop-SX code that works with VSA.


pnp transistors

Started by wilsondk, September 14, 2007, 06:10:04 PM

Previous topic - Next topic

wilsondk

I have a quick question.  How can I drive a pnp transistor with a stamp output. 
thank you all for any help.

JonnyMac

Why PNP?  What are you trying to drive?  If you give me more specifics I'll sketch a circuit for you.
Jon McPhalen
EFX-TEK Hollywood Office

wilsondk

jon,

Thank you for the fast response.

I am using a npn to supply ground to an led array.  I want to be able to supply +vdc to the array using another pin.  the load is about 360 ma which seems be be greater than the uln can handle using 4 channels.  does this clarify things?


JonnyMac

What you might want to, then, is go with a TIP120 (Darlington) driver; this can be connected right to you Px headers and controlled with HIGH and LOW.  This circuit will let you switch up to 5 amps -- plenty for your LED arrays.

Jon McPhalen
EFX-TEK Hollywood Office