November 12, 2024, 11:40:55 PM

News:

Be sure to checkout our Vixen interfaces in the Library forum -- if you want PC automation at near zero cost, EFX-TEK and Vixen is a great combination of tools.


Prop 1 VS SX

Started by chuckb0004, June 25, 2009, 01:55:24 PM

Previous topic - Next topic

chuckb0004

It seems I will need to move from prop1 to SX to reach the degree of complexity an upgraded scene will require. What is the learning curve from prop 1 programming to SX. What books would be recomended.

JonnyMac

It's significant, especially if you want to do the kinds of things we do in our products (the EZ-8, for example, is a programed SX chip -- same chip as in the Prop-SX).  Start simple and work your way up, but you can expect a good several months before you are able to write the kinds of programs that we do.  Think of the Prop-1 as a Volkswagon Bug and the Prop-SX as a Formula 1 racecar; big difference in horsepower and skill required for full control.

Sorry... we don't like to sugar-coat things.
Jon McPhalen
EFX-TEK Hollywood Office