Looking for boards

[youngti]

Hi All, at least those still here.  I have been reading the posts lately and see that this board has not been very active.  I myself have not been back on in a while, not really building any new props.  However i recently ran into an issue with a prop that's been working since 2008.  Its what i call the Grim Reaper and it sits above my garage greeting tot's as they come to the house (post here https://www.efx-tek.com/php/smf/index.php?topic=804.msg4450#msg4450).  Unfortunately it has stopped working and I am afraid its due to the Prop 1. I have taken the board and plugged it into the USB key and can see the red lights come on.  But when plugged into the prop i get nothing.  I will check the power supply this weekend (have to pull the whole thing down which is not fun) and see if that's the issue.  The prop has three boards, Scary Terry servo driver, Cowlacious audio and the Prop 1. Okay getting to my questions, sorry for the long intro.  1) does anyone have any Prop 1's or Prop 2's that they would be willing to sell me?  2).  Can you substitute a prop 2 or maybe a PropSX (which i have one) for a prop 1 and use the same code? and lastly 3) does anyone have any possible other suggestions for troubleshooting the prop?

[youngti]

If your interested here is my Halloween yard, the Grim reaper is at 1 minute, 34 seconds on the video.  https://www.youtube.com/watch?v=h3lMyWViWbo

[BigRez]

Hey Youngti-

1) does anyone have any Prop 1's or Prop 2's that they would be willing to sell me?

I do have a few, but sorry, now that I found them again I have plans.

2).  Can you substitute a prop 2 or maybe a PropSX (which i have one) for a prop 1 and use the same code?

The Prop-2 uses different code so that wont work. You'd have to rewrite new code.
I dont know about the PropSX, but think it's also different.

3) does anyone have any possible other suggestions for troubleshooting the prop?

Do no lights come on at all when connected to the power supply?  Certainly check the power supply. I've had a couple go out over time which caused the issue you're describing.